Micon KF Series
KF 系列 105℃低阻抗品
◆ 适用于通信设备、开关电源、工业测量仪器等电路中。
◆ 105℃负荷寿命达2000小时。
◆ 安全防爆阀设计。
KF Series Low Impedance
Fearures
◆ Used in communication equipments、switching power supply、
Industrial measuring instruments ,etc.
◆ Load life 2000 hours at 105℃.
◆ Safety vent construction design .
技术要求 Specifications
项目ltem
|
特性Performance Characteristics
|
|||||||||||||||||||||||||||||||||||
使用温度范围
Operating Temperature Range
|
-40to+105℃
|
-25to+105℃
|
||||||||||||||||||||||||||||||||||
额定电压范围
Rated Voltage Range
|
6.3to100VDC
|
160to400VDC
|
||||||||||||||||||||||||||||||||||
电容量范围
Capacitance Range
|
0.47to10000μF
|
0.47to220μF
|
||||||||||||||||||||||||||||||||||
电容量允差
Capacitance Tolerance
|
±20%(100Hz or120 Hz,+20℃)
|
|||||||||||||||||||||||||||||||||||
漏电流Leakage Current
(+20℃,**max)
|
I≤0.01CV或2(μA)额定工作电压充电2分钟后读数,
取大者 After2 minutes,whichever is greater measured with rated working voltage applied
|
I≤0.03CV(μA))额定工作电压充电2分钟后读数,取大者 After2 minutes,whichever is greater measured with rated working voltage applied
|
||||||||||||||||||||||||||||||||||
损耗角正切值
Dissipation Factor
(tgδ)
|
容量>1000μF时 ,每增加1000μF D.F值增加2%( 100Hz or 120Hz,+20℃)
For capacitance1000μF,Add 2%per another 1000μF (100Hz or 120Hz,+20℃)
|
|||||||||||||||||||||||||||||||||||
低温特性
Low Temperature
Characteristics
(120Hz)
|
阻抗比,**Impedance ratio ,max
容量>1000μF时 ,每增加1000μF ,Z - 25℃ / Z+20 ℃值增加0.5%, Z - 40℃ / Z+20 ℃值增加1% Fpr capacitance>1000μF , and 0.5% per another 1000μF for Z-25℃/Z+20℃, add 1% per another 1000μF for Z-40℃/Z+20℃
|
|||||||||||||||||||||||||||||||||||
负荷寿命Load Life
|
试验条件 持续时间:
负荷寿命 2000h
|
Test conditions Duration time:
LoadLife 2000h
|
||||||||||||||||||||||||||||||||||
环境温度:+105℃
|
Ambient timperature: +105℃
|
|||||||||||||||||||||||||||||||||||
施加电压:额定工作电压(VDC)
|
Applied voltage: Rated Working Voltage(DVC)
|
|||||||||||||||||||||||||||||||||||
试验后要求:室温下恢复16小时,+20℃测试
|
After test requirements: Resumde 16 hours at
normal temperature
|
|||||||||||||||||||||||||||||||||||
电容量变化:≤±25%规定值
|
Capacitance change:≤±25% of the initial measured value
|
|||||||||||||||||||||||||||||||||||
损耗角正切值:≤200%初始值
|
Dissipation Factor:≤200% of the initial specified value
|
|||||||||||||||||||||||||||||||||||
漏电流:≤规定值
|
Leakage Current:≤The initial specified value
|
|||||||||||||||||||||||||||||||||||
储存寿命Shelt Life
|
试验条件
|
Test conditions
|
||||||||||||||||||||||||||||||||||
持续时间:1000小时
|
Duration time: 1000hours
|
|||||||||||||||||||||||||||||||||||
环境温度:+105℃
|
Ambient temperature:+105℃
|
|||||||||||||||||||||||||||||||||||
施加电压:无
|
Applied voltage: None
|
|||||||||||||||||||||||||||||||||||
试验后要求:室温下恢复16小时,+20℃测试
|
After test requirements: Resumed 16 hours at
normal timperature
|
|||||||||||||||||||||||||||||||||||
电容量变化:≤±20%规定值
|
Capacitance change:≤±20% of the initial measured value
|
|||||||||||||||||||||||||||||||||||
损耗角正切值:≤200%初始值
|
Dissipation Factor:≤200% of the initial specified value
|
|||||||||||||||||||||||||||||||||||
漏电流:≤200%规定值
|
Leakage Current:≤200% of the initial specified value
|